LMV321TP-CR 40μA,1.27MHz,Micro-Power Rail-to-Rail I/O Op Amp

　　LMV321TP/358TP/324TP are CMOS single,dual,and quad op-amps with low offset,stable highfrequency response,low power,low supply voltage,and rail-to-rail inputs and outputs.They incorporate 3PEAK’s proprietary and patented design techniques to achieve best in-class performance e among all micro-power CMOS amplifiers.The LMV321TP/358TP/324TP is unity-gain stable under Any Capacitive Load with 1.27 MHz gainbandwidth product,0.9 V/μs slew rate while consuming only 40μA of supply current per amplifier.Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range.This combination of features makes the LMV321TP/358TP/324TP superior among rail-to-rail input/output CMOS op-amps in its power class.The LMV321TP/358TP/324TP family is an ideal choice for battery-powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp.

 

　　Features

 

　　-Stable 1.27 MHz GBWP with Low IQ of Only 40μA Typical per Amplifier

 

　　-0.9 V/μs Slew Rate

 

　　-Offset Voltage:3.5 mV Maximum

 

　　-Offset Voltage Temperature Drift:0.6μV/°C

 

　　-Input Bias Current:1 pA Typical

 

　　-Beyond the Rails Input Common-Mode Range

 

　　-Outputs Swing to within 5 mV Typical of each Rail

 

　　-No Phase Reversal for Overdriven Inputs

 

　　-Single+2.1 V to+6.0 V Supply Voltage Range

 

　　-−40°C to 125°C Operation Range

 

　　Applications

 

　　-Active Filters,ASIC Input or Output Amplifier

 

　　-Sensor Interface

 

　　-Smoke/Gas/Environment Sensors

 

　　-Portable Instruments and Mobile Device

 

　　-Audio Output

 

　　-Battery or Solar Powered Systems

 

　　-Medical Equipment

 

　　-Piezo Electrical Transducer Amplifier