LMV321TP/LMV358TP/LMV324TP Micro-Power Rail-to-Rail I/O Op A

LMV321TP/358TP/324TP are CMOS single, dual,and quad op-amps with low offset, stable high-frequency response, low power, low supply voltage,and rail-to-rail inputs and outputs. They incorporate3PEAK’s proprietary and patented design techniquesto achieve best in-class performance e among allmicro-power CMOS amplifiers.
　　
　　The LMV321TP/358TP/324TP is unity-gain stableunder Any Capacitive Load with 1.27 MHz gain-bandwidth product, 0.9 V/μs slew rate whileconsuming only 40 μA of supply current per amplifier.
　　
　　Beyond the rails input and rail-to-rail outputcharacteristics allow the full power-supply voltage tobe used for signal range.
　　
　　This combination of features makes the LMV321TP/358TP/324TP superior among rail-to-rail input/output CMOS op-amps in its power class. TheLMV321TP/358TP/324TP family is an ideal choice forbattery-powered applications because they minimizeerrors due to power supply voltage variations over thelifetime of the battery and maintain high CMRR evenfor a rail-to-rail input op-amp.

Features
 Stable 1.27 MHz GBWP with Low IQ of Only 40μA Typical per Amplifier
 0.9 V/μs Slew Rate
 Offset Voltage: 3.5 mV Maximum
 Offset Voltage Temperature Drift: 0.6 μV/°C
 Input Bias Current: 1 pA Typical
 Beyond the Rails Input Common-Mode Range
 Outputs Swing to within 5 mV Typical of eachRail
 No Phase Reversal for Overdriven Inputs
 Single +2.1 V to +6.0 V Supply Voltage Range
 −40°C to 125°C Operation Range
Applications
 Active Filters, ASIC Input or Output Amplifier
 Sensor Interface
 Smoke/Gas/Environment Sensors
 Portable Instruments and Mobile Device
 Audio Output
 Battery or Solar Powered Systems
 Medical Equipment
 Piezo Electrical Transducer Amplifier