TPT75176B RS485 Chip -3peak

3PEAK’s TPT75176A/B is enhanced RS485 which exceeds standard TIA/EIA-485-A with±12kV ESD Protected,3.0~5.5V powered,single transceiver for balanced communication.It also features the larger output voltage and higher data rate-up to 10Mbps-required by high speed PROFIBUS applications,and is offered in Industrial and Extended Industrial(-40°C to+125°C)temperature ranges.This transceiver requires a 3V~5.5V tolerance supply,and delivers at least a 2.1V differential output voltage on 5V supply condition.This translates into better noise immunity(data integrity),longer reach,or the ability to drive up to three 120Ωterminations in“star”or other non-standard bus topologies,at the exceptional 10Mbps data rate.Receiver(Rx)inputs feature a“Full Fail-Safe”design,which ensures a logic high Rx output if Rx inputs are floating,shorted,or terminated but undriven.Rx outputs feature high drive levels(typically>25mA VOL=1V)to ease the design of optically isolated interfaces.The TPT75176A/B is available in an SOP8,MSOP8 and DFN3X3-8L package,and is characterized from–40°C to 125°C.

 

　　Features

 

　　◼High Data Rates:

 

　　TPT75176B:10Mbps 5V Supply

 

　　TPT75176A:5Mbps 5V Supply

 

　　◼35ns Tx/Rx Propagation Delays; 10ns(Typ)Skew

 

　　◼Full Fail-safe(Open,Short,Terminated)Receivers

 

　　◼Up to 128 Nodes on a Bus(1/4 unit load)

 

　　◼Wide Supply Voltage 3.0V~5.5V

 

　　◼Low Quiescent Supply Current:3 mA

 

　　◼Bus-Pin Protection:

 

　　-±8 kV IEC-ESD Contact

 

　　-±15 kV IEC-ESD Air-discharge

 

　　◼Pb-Free

 

　　Applications

 

　　-PROFIBUS®DP and FMS Networks

 

　　-SCSI“Fast 40”Drivers and Receivers

 

　　-Motor Controller/Position Encoder Systems

 

　　-Factory Automation

 

　　-Field Bus Networks

 

　　-Industrial/Process Control Networks