LP4068B5F 800mA锂离子和锂聚合物充电IC_数据手册

发表时间：2023-11-28 20:54

The LP4068B5F is a complete constant-current/constant voltage linear charger for single cell lithium-ion battery.Its SOT23-5 package and low external component count make the LP4068B5F ideally suited for portable applications.No external sense resistor is needed,and no blocking diode is required due to the internal MOSFET architecture.Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature.The charge voltage is fixed at 4.2V,and the charge current can be ISET programmed externally with a single resistor.

The LP4068B5F automatically terminates the charge cycle when the charge current drops to 1/10 setting current value after the final float voltage is reached.

When the input supply is removed,the LP4068B5F automatically enters a low current state,dropping the battery drain current to less than 1µA.

Other features include charge current monitor,under voltage lockout,automatic recharge and a status pin.

1,Features

•Input Voltage up to 28V

•Input Over Voltage Protection：7V

•Short-circuit protection

•Programmable Charge Current up to 800mA

•1µA Battery Reverse Current

•Protection of Reverse Connection of Battery

•No MOSFET,Sense Resistor or Blocking Diode Required

•Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating

•SOT23-5/TDFN-8(2mm*3mm)Package

•RoHS Compliant and 100%Lead(Pb)-Free.

2,Applications

•Portable Media Players/Game

•Power Bank

•Bluetooth Applications

•PDA/MID