TP6002-SR Micro Power OPA-3peak

　　The TP600X series are CMOS single,dual,quad opamps with RRIO,low offset,low power and stable high-frequency response.They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth,0.7 V/μs slew rate,and low distortion while drawing only 80μA of quiescent current per amplifier.The common-mode input voltage range extends 100 mV beyond V−and V+,and the outputs swing rail-to-rail.The TP600X family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve the input/output range and performance.The combination of features makes the TP600X an ideal choice for motor control and portable audio amplification,sound ports,and other consumer Audio.The TP600X Op-amp is very stable,and it is capable of driving heavy capacitive loads such as those found in LCDs.The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs,ASICs,or other wide output swing devices in singlesupply systems.

 

　　Features

 

　　-Supply Voltage:2.1 V to 6.0 V

 

　　-Low Supply Current:80μA per channel

 

　　-Rail to Rail Input and Output

 

　　-Bandwidth:1 MHz

 

　　-Slew Rate:0.7 V/μs

 

　　-Excellent EMI Suppress Performance

 

　　-Offset Voltage:±3 mV Maximum

 

　　-Offset Voltage Temperature Drift:2μV/°C

 

　　-Low Noise:27 nV/√Hz at 1 kHz

 

　　-High Output Capability:100 mA

 

　　-−40°C to 125°C Operation Temperature Range

 

　　Applications

 

　　-Active Filters,ASIC Input or Output Amplifier

 

　　-Sensor Interface

 

　　-Smoke/Gas/Environment Sensors

 

　　-Portable Instruments and Mobile Device